Live pig markets

Although livestock markets are spread throughout the country there are no live pig markets in Kenya. This is owing to the many problems that have faced the pig industry in the past. Traders move from village to village looking for pigs where live pigs are sold at the farm gate.

They then transport the live pigs to the various destinations where money exchange hands. However Farmer’s Choice Limited does not buy live pigs. Instead farmers transport them to the factory and are paid according to cold dressed weight (CDW) after slaughter.

Farmer’s Choice Limited

Farmer’s Choice is the largest abattoir in Kenya located on the outskirts of Nairobi. This private facility combines slaughtering and processing.  They mainly supply affiliate hotels with pork products and are also involved in exports. The factory slaughters about 400 pigs and processes 350 pig carcasses per day into products such as ham, bacon, sausages and burgers. Most of the pigs come from their farms and the rest are supplied by contract and other pig farmers.

Farmers Choice sells their products to tourist hotels, restaurants, supermarkets and other retail outlets in various destinations in Kenya and neighboring countries.

Ndumboini Farm slaughter house

This abattoir is located in Kikuyu District of Kiambu County and receives pigs from all over the country. They do not carry out any processing of pork. It has a capacity of slaughtering 40 to 50 pigs per day, most of which come from Kiambu and surrounding areas, with a significant number coming from Nyanza.

This abattoir is the main supplier of pork to most of the butcheries in Nairobi city centre, as well as its estates and outskirts. Some meat is transported to butcheries in Thika and Kitengela.

Lyntano slaughter house

This facility is situated in the northern outskirts of Nairobi. It slaughters between six and ten pigs a day mainly from Nairobi and Kiambu. Outlets for the carcasses include Nairobi City Market butcheries, several hotels, popular entertainment places and supermarkets.

Kabati slaughter house

Kabati abattoir is located in Muranga South District. Cattle, sheep and goats are slaughtered in one section while pigs are slaughtered in the other. The two operations are separate. The abattoir kills between 18 and 25 pigs per day, limited only by the shortage of pigs for slaughter. Most of the pigs are supplied by small-scale farmers in the district, with a few from Thika, Machakos, Nyeri, Nyahururu and Kirinyaga and Kitale. Traders sometimes slaughter underweight pigs to meet demand. The main market for the carcasses is Thika Town which is probably leading town in Kenya in pork consumption and has many pork butcheries and eateries.

READ ALSO:   Is the Govt undermining animal health service providers in Kenya?

Other slaughter houses / slabs

Large and medium pig commercial enterprises around Nairobi (Ngong and Kiserian) and Nakuru have their own slaughter slabs where they slaughter their own pigs and sometimes those of the neighboring small-scale farmers. Some of these enterprises own butcheries in Nairobi and Nakuru where the pork is sold. Pig-raising areas in major cities, towns and rural districts generally have various types of slaughter slabs and outlets in local butcheries and eateries.

Formulating feed rations for pigs

Feed rations for pigs are primarily made of grains, legumes, vitamins and minerals. Many pig farmers still allow pigs to forage on pasture and supplement with any available farm waste. Some offer maize and other grains without considering the amounts and economic returns. This type of feeding program is very inefficient and the best feed to gain ratio that can be achieved is normally in the range of 5:1.

In advanced systems pigs are totally kept in confinement and provided a well balanced diet. To provide such a well balanced diet the nutritional requirements of different classes of pigs must be known and met. The main considerations for feed ration for pigs should therefore consist of meeting biological needs with appropriate combination of feed ingredients and pure sources of limiting nutrients to provide a nutritionally balanced diet. This information must be accurate so as to make a cost effective diet when you take into account that feed cost contributes about 55 to 70% of the total cost of production

Daily nutrients requirement for pigs

There various nutrients required by pigs and other farm animals which include water, energy, proteins, fats, vitamins, minerals and additives. Under practical feeding conditions whereby natural feedstuffs are used some of the required nutrients are likely to be deficient. Lack of these nutrients are manifested in various forms such as impaired growth, weak pigs, weight loss, skin problems, rickets, problems with blood, hypersensitivity, reproductive problems, cracked hooves, lameness and sometimes death.

In addition the daily nutrients required by the pig for maintenance, growth and reproduction depend on the size and physiological state of the pig. Nutrient interaction also plays an important role. It refers to a situation whereby the presence of a certain nutrient in the diet affects the availability of another required nutrient. The feeding standards as provided by NRC, ARC or KEBS are minimum requirements and should be considered as starting points in diet formulation.

READ ALSO:   What to consider before starting pig farming in Kenya

Procedure for formulating rations

Due to the complexity of this procedure which any farmers might not be able to perform it is prudent to use already prepared rations from reliable commercial sources. Mixing the rations at home after getting the formula can also be very tricky. Experienced farmers use complex computer programs to come up with accurate diets and mix the feed ingredients with complex equipment. However, there are those who use trial and error methods with varying degrees of success.

The following information is required to be able to formulate a pig ration.

1.  Recommended nutrient levels for various categories of pigs.

An example is given on the table below.

Liveweight in Kg
10 – 2020 – 5050 – 110
Expected daily intake (g/day)95019003100
Energy intake (Kcal DE/Kg diet)340034003400
Protein (%)181513
Amino acids (%)
Methionine + Cystine0.480.410.34
Calcium (%)0.400.600.50
Phosphorous (%)0.600.500.40
Zinc (mg/Kg diet)0.800.600.50
B12 (µg/Kg diet)15105
A (IU)175013001300
D (IU)200150150
E (IU)111111

2.      Nutrient composition of various feedstuffs

For example

Reject wheat3400120.40.2
Soya bean3220440.30.65
Dicalcium phosphate2318
Once this information is available various methods of calculation can be employed. The simplest is the Pearson square method. A portion of the ration is fixed and the variable part is calculated using the square.

For example to formulate a pig diet for finisher pigs which has Crude Protein (CP) of 13 – 14% with calcium requirements of 0.5% and phosphorous 0.4%:

Step 1: Fix the important feeds.

Trial and error method is used to fix the important feedstuff. An important guide is to know the maximum inclusion rates of particular feedstuffs because if they exceed a certain level they may become toxic to the animal or interfere with the digestive process. In this example we fix the following feedstuffs at the percentages given on the table; limestone, dicalcium phosphate, trace elements and barley.

Dicalcium phosphate2
Trace minerals1

Step 2: Calculate the composition of the remaining feedstuff using CP levels

The balance should form the bulk of the feedstuff; in this case it is 86.5%. Normally two feed sources are considered at this level, one with high energy content and another with high protein content. In this example reject wheat has high energy content and soya bean has high protein content.

READ ALSO:   Key Essentials For A Successful Poultry Farming Business In Kenya

The overall feed composition should have a minimum 13% CP. This percentage is needed in the remaining portion of the ration. This translates to 13 / 0.865 = 15% CP. Put this figure in the middle of the square then the respective CP% of the remaining two feedstuffs at the corners on the left of the square.

Pearson square

Then subtract the figures diagonally across the square only indicating the positive sum on the right. Get the sum of the figures on the right of the square and use it to calculate the percentages of the respective feedstuff. In this case the percentage of reject beans in the balance is (29/32) 100 = 90.6% and soya beans (3/32) 100 = 9.4%

Finally convert these percentages to total ration.

E.g. reject wheat forms 90.6% of 86.5% of ration = 78.4% of total ration.

Soya beans forms 9.4% of 86.5% of ration = 8.1% of total ration.

When you bring all the percentages together you get the following feed composition:

Reject wheat78.4
Soya bean8.1
Dicalcium phosphate2
Trace minerals1
So the final composition of this diet is as follows:
Ingredient% in dietDECPCaP
Reject wheat78.42665.609.4080.3130.16
Soya bean8.1260.823.5640.0240.05
Dicalcium phosphate20.4600.36
Trace minerals1

As I said before, a number of commercial feed manufacturers have well balanced diets and it may not be necessary to undergo this complex procedure to make your own diet. There are always chances of getting it wrong. In Kenya there are three types of pig feeds in the market; creep feed, sow and weaner and finisher ration. These feeds have been formulated to meet the nutritional demands of the various categories of pigs.

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

No votes so far! Be the first to rate this post.

As you found this post useful...

Follow us on social media!