Except for a few feed manufacturers who keep to the standards in poultry feed formulations, many feed companies in the country make very poor quality feeds, a situation which has led huge losses.

Poor quality feeds lead to a slow growth in chickens, low egg production, diseases or even death. Making poultry feeds on the farm is one of the best ways to maintain quality and cut the cost of production.

The common ingredients are whole maize, maize germ, cotton seed cake, soya beans, sunflower or fish meal (omena).

In addition, farmers need to add several feed additives (micronutrients, minerals and vitamins) to make ensure their chicken have a balanced feed that meets their daily nutrient requirements.

Material is available cheaply, especially after the harvesting season. Depending on the cost of raw material, farmers who make their own feeds at home save between 30 to 50 per cent for every 70kg bag of chicken feed, depending on the source of their raw materials.

Due to government regulation, major feed companies have reduced the standard quantity of feed from 70kg to 50kg per bag, but the price of feed still remains almost the same.

This means that farmers who are able to make their own feeds make great savings on feeds which take up to 80 per cent of the production costs.

To formulate feeds, farmers have to use the Pearson Square method. In this method, the digestible crude protein (DCP) is the basic nutritional requirement for any feed preparation for all animals and birds.

Now, assuming that a farmer wants to make feed for their chicken using this method, they have to know the crude protein content of each of the ingredients they want to use to make their feed.

The following are the DCP values for each of the common ingredients used in poultry feed making:

Whole maize โ€” 8.23%

Soya โ€” 45%

Fishmeal (omena) โ€” 55%

Maize bran โ€” 7%

Sunflower โ€” 35%

Each category of chicken has its nutritional requirement. For example, if we want to make feed for layers, the feed should have at least 18 per cent crude protein.

If one was to formulate feed for layers, then they would have to calculate the percentage of DCP in each of the ingredients they want to use to ensure that the total crude protein content is at least 18 per cent.

Therefore, to make a 70kg bag of feed for layers, a farmer would require the following ingredients:

34kg of whole maize

12kg of soya

8kg of omena (fishmeal)

10kg of maize bran

6kg of lime (as a calcium source)

To find out if all the above ingredients meet this standard of 18% crude protein, a farmer can do a simple calculation as follows:

Whole maize โ€” 34kg x 8.23 รท100 = 2.80 %

Soya โ€” 12kg x 45kg รท 100 = 5.40 %

Omena โ€” 8 kg x 55kg รท 100 = 4.40 %

READ ALSO:   JackFruit (Fenesi) Farming in Kenya and its wide range of health benefits

Lime โ€” 6 kg x 0 kg รท 100 = 0.00%

Total % of crude protein = 13.30%

To get the total crude protein percentage of all these ingredients in a 70kg bag of feed, the farmer should take this crude protein content of the combined ingredients, divide by 70kg and multiply by 100, thus โ€” 13.30 รท70 ร—100 = 19%; this shows that the crude protein content of the above feed formulation is 19%, which is quite adequate for layers.

To ensure the chicken to get all they need in terms of nutrients such as vitamins, minerals and amino acids, you need these additives in their standard quantities.

In order to make it even simpler for farmers who would wish to make their own feeds, below are feed formulations for each category of chickens and stage of growth already worked out such that all the farmer needs is to buy the ingredients and mix them:

Making a 70 kg layers of layers chick mash (1-4 weeks)

Growing chicks require feed with Digestible Crude Protein (DCP) of between 18 to 20 per cent. The following formulation can be used to make a 70kg bag of layers chick mash:


31.5kg of whole maize

9.1kg of wheat bran

7.0kg of wheat pollard

16.8 kg of sunflower (or 16.8 kg of linseed)

1.5kg of fishmeal

1.75kg of lime

30g of salt

20g of premix Amino acids

70g of tryptophan

3.0g of lysine

10g of methionine

70 g of Threonine

50g of enzymes

60g of coccidiostat

50g of toxin binder

Making a 70 kg bag of growers mash (4 to 8 weeks)

Growers (pullets or young layers) should be provided with feed having a protein content of between 16 and 18 per cent. Such feed makes the young layers to grow fast in preparation for egg laying:

10kg of whole maize

17kg of maize germ

13kg of wheat pollard

10kg of wheat bran

6kg of cotton seed cake

5kg of sunflower cake

3.4kg of soya meal

2.07kg of lime

700g of bone meal

3kg of fishmeal


14g of salt

1g of coccidiostat

18g of Pre-mix

1g of zinc bacitracitrach

7g of mycotoxin binder

Making a 70 kg bag of layersโ€™ mash (18 weeks and above)


34kg of whole maize

12kg of Soya

8kg of fishmeal

10kg of maize bran, rice germ or wheat bran

6kg of lime

Amino acids

175g premix

70g lysine

35g methionine

70kg Threonine

35g tryptophan

50g toxin binder

Layer feed should contain a Digestible Crude Protein (DCP) content of between 16-18 per cent.

The feed should contain calcium (lime) for the formation of eggshells (laying hens that do not get enough calcium will use the calcium stored in their own born tissue to produce eggshells).

Layer feed should be introduced at 18 weeks.

Formulating a 70 kg bag of broiler feed

Broilers have different feed requirements in terms of energy, proteins and minerals during different stages of their growth. It is important that farmers adapt feed rations to these requirements for maximum production.

READ ALSO:   Potato production set to hit 2.5 million tons this year

Young broilers have a high protein requirement for the development of muscles, feathers, etc. As the broilers grow, their energy requirements for the deposit of fat increase and their protein requirements decrease.

They therefore require high protein content in their starter rations than in the grower and finisher rations.

Broilers should have feed that has between 22 -24 per cent DCP. The following guidelines can help the farmer to make the right feed at each stage of growth:

Broiler starter feed (1-4 weeks)

40kg of whole maize

12kg of fishmeal (or omena)

14kg of soya bean meal

4kg of lime

70g of premix

Amino acids

35g of lysine

35g of Threonine

Preparing broiler Finisher feed (70kg)

10kg of whole maize

16.7kg of maize germ

13.3kg of wheat pollard

10 kg wheat bran

6 kg of cotton seed cake

4.7kg of sunflower cake

3kg of fishmeal 2kg of lime

3.4kg of soya meal

40g of bone meal

10g of grower PMX

5g of salt

5g of coccidiostat

5g of Zincbacitrach

NOTE: For farmers who have more than 500 chickens, it is advisable to make 1 ton of feed at once (There are 14 bags of feed in one ton).

Therefore, to make 1 tonne of feed, all a farmer needs is to multiply each of the ingredients by 14. Ensure that all the feed you make will last for one month and not longer โ€” this ensures the feed remains fresh and safe for chickens. Any feed that lasts more than one month may deteriorate in quality and can affect your chickens.

Daily feed requirements for each growth stage

Farmers should maintain the right feed quantities for chicken at each stage of growth as shown below:

โ€” An egg-laying chicken requires 130-140g of feed per day.

โ€” A chick requires a minimum 60g per day. If they finish their daily rations, give them fruit and vegetable cuttings to ensure they feed continuously.

โ€” Young chickens (or pullets) which are about to start laying eggs should be fed 60g for 2 and ยฝ months and then put on layer diet (140g per day). Supplement the feed with vegetables, edible plant leaves and fruit peelings in addition to their feed rations.

โ€” Broiler chicks require 67g per day. Broiler finishers require 67g of feed per day to the day of slaughter.

โ€” Chickens are very sensitive to aflatoxins- never use rotten maize (maozo) while making feeds.

Where to buy ingredients

Farmers who need raw materials for feed making including feed additives (pre-mixes and amino acids) can order them from agroveterinary shops nearest to them.

There are also companies doing calibration services for farmers who wish to make feeds in large scale farming enterprises and even for any farmer who requires these services.

READ ALSO:   Poor artificial insemination techniques are some of the reasons hindering the growth of the dairy industry in Kenya.


Important tips on feed preparation

When making home made feed rations, it is important to do experimental trials, by isolating a number of chickens, feeding them and observing their performance. If the feed rations are right, the broilers will grow fast and layers will increase egg production (at least 1 egg after every 27 hours).

Buy quality fishmeal from reputable companies. If omena is used, the farmers must be sure of its quality; most of the omena in the open-air markets may be contaminated. Farmers are advised to go for soya meal if they cannot get good quality omena.

Always mix the micronutrients (amino acids) first before mixing them with the rest of the feed.

For mixing, farmers are advised to use a drum mixer (many jua kali artisans can make one). Never use a shovel to mix feed because the ingredients will be unevenly distributed.

Important: To improve on the feed quality, farmers making their own feeds should always have it tested to ensure the feed is well balanced.

The KARLO (Formerly KARI) Centre in Naivasha has modern feed testing equipment that can test all nutrients and even the quality of the raw material used. It costs Ksh1000 to test one sample.

After preparing your feed, take a 1kg sample; send it by courier to KARI, Naivasha, Tel. 0726 264 032 or 0738 390 715. If you are on email, the centre can send the results to you within 24 hours.

CREDIT: Seeds Of Gold

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

No votes so far! Be the first to rate this post.

As you found this post useful...

Follow us on social media!